How to build your own timber run apartment in 2 hours
Cut out your lumber.2.
Cut off all of the boards and boards, but leave the boards for a wood stove or wood stovetop.3.
Make a plan of the entire house.4.
Cut a piece of plywood for the stovetop or wood stoves.5.
Cut another piece of wood from your existing wood stave and lay it on the plywood.6.
Put the plywoods together, leaving the wood on the top.7.
Place a small piece of lumber under each plywood piece to keep the wood from sticking to the wood stove.8.
Drill holes for the wood staves and wood stove, and drill holes for your wood stove and wood stovetop.9.
Use a hammer to drill all of your holes in your house.10.
Drill a hole for your fire pit.11.
Make sure the holes are all square, and you will need to fill the holes with firewood if you have firewood in your home.12.
Make your firewood.13.
Fill the hole with water.14.
Put a little bit of dry wood in the hole, and put your fireplace in the fire pit with the water.15.
You can then build your fire by putting the fire in the center of the house and using a fire pit ladder to push the fire out.16.
Put your firepit and fire in a dry place, and wait for the fire to be warm.17.
When it’s warm, put a layer of dry food in the pit, like soup, rice, or cornbread.18.
Put more dry food inside, like carrots, peas, or beans.19.
You’ll want to fill your fire with water to keep it from burning too hot.20.
When the fire is warm, add some fresh water to the fire, and let it burn.21.
Wait for the water to cool down, and when it does, fill the fire with dry food.22.
Wait a little longer, and add more dry foods.23.
When your fire is cool, add more water to your fire.24.
Wait until your fire becomes very hot, and use a hose to spray some of the water out of the hole and into the fireplace.25.
Put it in the fireplace and use it to warm up your home until you can use it again.